Skip to content
Got Chamber credit? Sign in to use it at checkout Sign in

QTRMSTR Detritus Skull Pile: 50 mixed resin skulls for basing 28mm Warhammer miniatures

How to Base Warhammer Miniatures: Skulls, Scatter and Battlefield Basing

Posted By Graham Scutt on

You've built the squad. You've painted the squad. You've put them on the table, stood back, and something's off. They look like five very nice models standing on five black plastic coasters. That's the base, and it's the cheapest upgrade any miniature can get.

Basing is where a model stops floating in space and starts standing somewhere: a trench line, a plague swamp, the deck of a ship that's being boarded. It also hides a multitude of sins. A good base drags the eye down and away from that slightly wobbly edge highlight, and it ties a whole army together so it reads as one force rather than twenty separate projects. Here's how to do it, from the glue to the last tuft, and where skulls, basing bits and scatter terrain fit in.

QTRMSTR Detritus Skull Pile: 50 mixed resin skulls for 28mm bases on a snap-pin tile

What you need to base miniatures

You don't need much, and most of it lasts for years:

  • Superglue for sticking resin or plastic basing bits down, and PVA for sand and grit. Both are in our glue and adhesives range.
  • Ground cover: sand, grit, cork or a texture paint. Texture paint is the quickest and cleanest way to do a whole army.
  • Basing bits: skulls, spent shells, rubble and wreckage. These are what turn "ground" into "a place where something happened".
  • A drybrush and an old brush you don't mind wrecking with glue.
  • Tufts or static grass for the finishing touch.

Everything above lives in our basing materials collection. If you're not sure what suits your army, the basing finder will match a scheme to it.

Step 1: Decide where your army is fighting

Before any glue comes out, pick a world and stick to it. Grey rubble for an urban 40k army. Brown earth and green tufts for a fantasy host. Snow for the frozen north. Slime and fungus for anything with a plague theme. A consistent base across a whole army is what makes it look like an army, and it makes every later decision (which bits, which tufts, which drybrush colour) easy.

Our own QTRMSTR range is built around this idea. The Detritus basing bits come in themed "theatres": Wasteland, Blight, Verdant, Frostline, Xeno and Voidline. Each one has matching scatter terrain, so your bases and your table tell the same story.

Step 2: Glue the basing bits down first

This is the step most beginners do in the wrong order. Bits go down before the sand or texture paste, not on top of it. That way the ground builds up around them and they look half-buried, as if they've been lying in the mud for a week, rather than placed neatly on the surface like ornaments on a mantelpiece.

  • Use superglue for resin bits. PVA won't hold them reliably.
  • Less is more. One or two bits on an infantry base is plenty. Save the big heaps for characters, monsters and objective markers.
  • Leave room for the feet. Glue the model on first, or at least dry-fit it, so you're not trying to wedge a boot between three skulls later.
  • Tell a story across a squad. A dropped helmet on one base, a snapped rifle on the next, spent shells by the sergeant. Nobody notices the individual bits; everybody notices that the squad looks like it's been somewhere.
QTRMSTR Detritus Dropped Kit: 30 unpainted resin basing bits including spent shells, a gas mask, a jerry can and a snapped rifle

The QTRMSTR Dropped Kit pack is a good example of the idea: thirty bits, three each of ten designs (spent shells, a gas mask, a jerry can, a snapped rifle and so on), so a whole squad can share a theme without every base being identical. They're £7.99 at the time of writing.

Step 3: Where do the skulls go?

It's Warhammer. There will be skulls. The trick is restraint, or at least deliberate excess.

  • Troops: one skull, maybe two, half-sunk into the ground. Enough to say "grim", not enough to say "ossuary".
  • Characters and warlords: this is where you go big. A small heap around the feet makes a leader stand out across the table.
  • Monsters: a large beast skull next to a big model sells the scale brilliantly.
  • Match the skull to the enemy. Orc skulls on a Space Marine's base, human skulls on an Ork's. It's a tiny detail that tells the whole story of who's been winning.

Our Detritus skull packs come fifty at a time, which is enough to be generous across a full army and still have a few left for terrain. There's the mixed Skull Pile (with a big horned dragon skull thrown in for your centrepiece), human Bone Yard, cyborg Hardwired, monstrous Big Game and orcish Tusk & Jaw, all £7.99.

Step 4: Add the ground

Now the texture. You've got two main routes:

  • Texture paint or paste: brush or spread it on straight from the pot. It dries with the grit already in it, and it's the quickest way to base thirty models in an evening.
  • PVA and sand: paint watered-down PVA onto the base, dip it in sand or grit, tap off the excess and leave it to dry. Add a few bits of cork or larger stones for rocks.

Either way, push the texture right up to the edges of your basing bits so they sit in the ground. If any bits end up buried completely, that's fine. Some of the best bases have a skull that's only half visible.

Step 5: Prime and paint

If your bits are 3D printed resin, give them a wash in warm soapy water before they go on the base, and let them dry fully. Then prime the base along with the model (or separately, if you'd rather paint them apart) using a spray primer.

Base the ground in a mid-tone (a brown, grey or sandy colour depending on your world), then pick out the bits in their own colours: bone for skulls, metal for shells and tools, khaki or green for kit.

Step 6: Wash, then drybrush

This is the two-step trick that makes basing look good with almost no skill:

  • Wash the whole base with a dark shade. It runs into every gap and gives instant depth.
  • Drybrush once the wash is dry. Wipe almost all the paint off the brush, then flick it across the texture. The paint catches only the raised edges, and suddenly every grain of sand and every crack in every skull is picked out.

Drybrushing destroys brushes, so don't use your good ones. Use a stiff, flat-ended drybrush and accept that it's a consumable. The QTRMSTR Calibre Brush Set includes six goat-hair drybrushes in sizes 2 to 12 for exactly this, alongside four Kolinsky sable brushes for the fine work and six nylon liners. When you're done, a wash with DECON brush soap gets the dried paint out of the bristles before it sets.

QTRMSTR Calibre Brush Set: 4 Kolinsky sable brushes, 6 nylon liners and 6 goat-hair drybrushes in a window box (render)

Step 7: Tufts, snow and the rim

  • Tufts go on last. Peel, add a tiny dot of PVA, press down. Two or three per base, placed off-centre and against a rock or a basing bit, look natural. Dead centre looks like a toupee. Browse the full tufts range.
  • Snow sits best on top of everything, gathered against bits and in the lee of the model's feet.
  • Paint the rim a solid colour: black, brown or a dark version of your ground colour. It's the frame around the picture, and it's the single quickest way to make a base look finished.

Make the table match the bases

Here's where it all comes together. Once your army is based for a particular world, the table should look like that world too. That doesn't mean buying a whole new terrain set. It means filling the gaps between your big terrain pieces with smaller scatter that matches your theme.

Scatter terrain is the stuff that makes a battlefield look lived in: crates, fuel drums, sandbags, wreckage, a downed drone. Glue it to a base to make objective markers, or leave it loose and move it about between games. Our QTRMSTR Resin Salvage kits come in 8 and 10-piece themed sets for 28–32mm games, like the supply dump in TS-01 Debris Field or the sandbags and tank traps of TS-15 No Man's Land.

QTRMSTR Resin Salvage TS-01 Debris Field: 10 unpainted resin scatter terrain pieces including a fuel bowser, floodlight tower and mortar pit

If you want the bases and the table sorted in one go, each Terraform Theatre Pack puts a Detritus basing set and two matching Resin Salvage kits in one box: fifty pieces in all. At the time of writing they're £36.99, against £41.97 for the three bought separately.

  • Wasteland: trenches, supply dumps and battlefield litter. A natural fit for Astra Militarum and any grimdark front line.
  • Blight: slime, fungus, bone and leaking machinery. Plague armies, this is your swamp.
  • Verdant: mushrooms, ferns, temple walls and bamboo barricades for jungle and death-world tables.
  • Frostline: ice walls, bunkers and frozen kit for winter warfare.
  • Xeno: crystal, pods and alien growth for hive worlds and xenos invasions.
  • Voidline: bulkheads, cargo and deck litter for starship interiors. Kill Team players running boarding actions, this one's for you.
QTRMSTR Terraform Wasteland Theatre Pack: 50 unpainted resin terrain and basing pieces across three boxes

The honest bit: common basing mistakes

Gluing bits on top of the sand. They'll look placed rather than lost. Bits first, ground second.

Too much of everything. A skull, a tuft and a spent shell on one 32mm base is a story. Six skulls, four tufts and a crate is a skip.

Using your good brush to drybrush. You'll only do it once.

Leaving the rim unpainted. It's thirty seconds a model, and it's the difference between "done" and "nearly done".

Basing every unit differently. Pick a world. Stick to it. Your army will look twice as good on the table.

The short version

  • Order of work: bits, ground, prime, base coat, wash, drybrush, tufts, rim.
  • Glue: superglue for resin bits, PVA for sand and tufts.
  • Skulls: one or two on troops, a heap on characters.
  • Drybrushing: use a dedicated drybrush and clean it afterwards.
  • Consistency: one world per army, and match the table with scatter terrain.
  • Resin bits: wash in warm soapy water before priming.

Basing is the most forgiving part of the hobby. There are no lines to stay inside, the drybrush does most of the work, and a scruffy base often looks better than a neat one. Pick a world, bury a skull or two, and your army will look like it's actually fighting somewhere.

Further reading: still at the painting stage? Start with Warhammer Painting Tips for Beginners or How to Build and Paint Your First Warhammer 40k Army. Then browse the full QTRMSTR range for skulls, basing bits and scatter terrain designed and printed in Barry.

Graham Scutt — Hobby & Collectibles Specialist

Graham covers the full breadth of the hobby — from collectibles and miniature painting to Disney Lorcana. If it is on the shelves at Loaded Dice, he can point you to the right pick.

More from Graham Scutt →

Leave your thought here

Please note, comments need to be approved before they are published.

Related Posts

QTRMSTR DECON Brush Soap 60g tin for cleaning and conditioning miniature paint brushes
How to Clean Miniature Paint Brushes (and Make Kolinsky Sable Last)

How to clean miniature paint brushes after every session, rescue one stiff with dried acrylic, and keep a Kolinsky sable...

Read More
A teenager's hobby desk at Christmas with miniatures, paints, brushes and wrapped presents
Gifts for Teenage Boys Who Have Outgrown Toys (Christmas 2026)

Too old for toys, too young for whisky. Here is what to buy a teenage boy this Christmas, from a...

Read More

Get the models from this guide

Everything covered in this article — ready for same-day dispatch.

QTRMSTR Calibre Brush Set in its window box: 4 Kolinsky sable, 6 nylon liners and 6 goat-hair drybrushes (render)
All 16 QTRMSTR Calibre brushes laid out in size order (render)
Pre OrderExpected February 2027
14% off RRP
QTRMSTR Calibre Brush Set

297 Available for Pre Order

From £29.99RRPRecommended retail price £34.99
QTRMSTR DECON Brush Soap 60 g tin, lid label (render)
Cleaning a paint brush on QTRMSTR DECON brush soap (render)
Pre OrderExpected February 2027
QTRMSTR DECON Brush Soap 60g

482 Available for Pre Order

£8.99
QTRMSTR Resin Salvage TS-01 Debris Field – all 10 unpainted resin scatter terrain pieces
QTRMSTR TS-01 Debris Field real-size sheet: top and front views of all 10 pieces on a 5 mm grid, drawn to scale from our 3D files
Double Chamber Credit
£16.99
QTRMSTR Resin Salvage TS-02 Rot Pocket – all 10 unpainted resin scatter terrain pieces
QTRMSTR TS-02 Rot Pocket real-size sheet: top and front views of all 10 pieces on a 5 mm grid, drawn to scale from our 3D files
Double Chamber Credit
£16.99
QTRMSTR Resin Salvage TS-03 Old Country – all 10 unpainted resin scatter terrain pieces
QTRMSTR TS-03 Old Country real-size sheet: top and front views of all 10 pieces on a 5 mm grid, drawn to scale from our 3D files
Double Chamber Credit
£16.99
QTRMSTR Resin Salvage TS-04 Cold Front – all 10 unpainted resin scatter terrain pieces
QTRMSTR TS-04 Cold Front real-size sheet: top and front views of all 10 pieces on a 5 mm grid, drawn to scale from our 3D files
Double Chamber Credit
£16.99
QTRMSTR Resin Salvage TS-05 Alien Spoil – all 10 unpainted resin scatter terrain pieces
QTRMSTR TS-05 Alien Spoil real-size sheet: top and front views of all 10 pieces on a 5 mm grid, drawn to scale from our 3D files
Double Chamber Credit
£16.99
QTRMSTR Resin Salvage TS-07 Cargo Hold – all 10 unpainted resin scatter terrain pieces
QTRMSTR TS-07 Cargo Hold real-size sheet: top and front views of all 10 pieces on a 5 mm grid, drawn to scale from our 3D files
Double Chamber Credit
£16.99
Drawer Title

This website uses cookies to ensure you get the best experience on our website.

Similar Products
0